Date:04/25/2013 ID:faq002784_000




Title:
Scan a document and save the scanned image to a folder on a local or network hard disk (For Macintosh)

Description:

You can scan a document and save the scanned image to a preferred folder using ControlCenter2.

Note

Click here to see basic information on ControlCenter2, such as how to start ControlCenter2.

NOTE: Illustrations shown below are from a representative product and operating system and may differ from your Brother machine and operating system.
  1. Load your document.
  2. Click the Scan tab. If you want to change the scan settings, click here to see the details of how to change scan settings.
  3. Click File. The image will be saved in the folder you have chosen in the settings window for Scan to File.

    Scan to File
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

MFC-8810DW, DCP-7060D, DCP-7065DN, DCP-8110DN, DCP-8150DN, DCP-8155DN, DCP-J140W, HL-2280DW, MFC-7240, MFC-7360N, MFC-7460DN, MFC-7860DW, MFC-8510DN, MFC-8710DW, MFC-8910DW, MFC-8950DW, MFC-8950DWT, MFC-9460CDN, MFC-9560CDW, MFC-9970CDW, MFC-J280W, MFC-J425W, MFC-J430W, MFC-J435W, MFC-J5910DW, MFC-J625DW, MFC-J6510DW, MFC-J6710DW, MFC-J6910DW, MFC-J825DW, MFC-J835DW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear