Date:02/28/2013 ID:faq002773_000




Title:

When I print a document as a booklet from Microsoft Office 2003, a drawing object does not position correctly on the printed page. (For Windows® BR-Script Printer Drivers users)

Description:

This issue occurs if you use the BR-Script (PostScript) Driver and print a document as a booklet which includes a drawing object such as an AutoShape or a WordArt Object from Microsoft Office 2003 or later.

 

Please refer to the following Microsoft® knowledgebase article to resolve the issue.
http://support.microsoft.com/kb/436119
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

MFC-8810DW, DCP-8040, DCP-8045D, DCP-8060, DCP-8065DN, DCP-8080DN, DCP-8085DN, DCP-8110DN, DCP-8150DN, DCP-8155DN, DCP-9040CN, HL-1270N, HL-1450, HL-1470N, HL-1650, HL-1670N, HL-1850, HL-1870N, HL-2460, HL-2600CN, HL-2700CN, HL-3070CW, HL-3450CN, HL-4070CDW, HL-4150CDN, HL-4570CDW, HL-4570CDWT, HL-5050, HL-5070N, HL-5150D, HL-5170DN, HL-5240, HL-5250DN, HL-5280DW, HL-5340D, HL-5350DN, HL-5370DW/HL-5370DWT, HL-5440D, HL-5450DN, HL-5470DW, HL-5470DWT, HL-6050D, HL-6050DN, HL-6180DW, HL-6180DWT, HL-7050, HL-7050N, HL-8050N, MFC-7840W, MFC-7860DW, MFC-8220, MFC-8440, MFC-8460N, MFC-8480DN, MFC-8510DN, MFC-8660DN, MFC-8670DN, MFC-8680DN, MFC-8710DW, MFC-8840D, MFC-8840DN, MFC-8860DN, MFC-8870DW, MFC-8890DW, MFC-8910DW, MFC-8950DW, MFC-8950DWT, MFC-9010CN, MFC-9120CN, MFC-9320CW, MFC-9420CN, MFC-9440CN, MFC-9450CDN, MFC-9460CDN, MFC-9560CDW, MFC-9840CDW, MFC-9970CDW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear