Date:12/10/2010 ID:faq002436_000




Title:
I cannot remove red-eye.

Description:

There are some cases when red-eye may not be removed.

  • When the face is too small.
  • When the face is turning too far up, down, left or right.

We recommend you preview your photos on the LCD before you print them.
You can preview photos following the instructions below:

  1. Make sure you have put a memory card or USB Flash memory drive in the correct slot.  Press PhotoCapture button.
  2. Press the up or down arrow keys to select ViewPhoto(s).
  3. Press OK.

Note

If your photos are large files there may be a delay before each photo is displayed on the LCD.


If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

DCP-350C, DCP-385C, DCP-395CN, DCP-585CW, DCP-J125, MFC-465CN, MFC-490CW, MFC-495CW, MFC-5890CN, MFC-5895CW, MFC-6490CW, MFC-685CW, MFC-885CW, MFC-J220, MFC-J265W, MFC-J270W, MFC-J410W, MFC-J415W, MFC-J615W, MFC-J630W, MFC-J6510DW, MFC-J6710DW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear