Please follow the steps below:
- Place your Brother machine close to the access point (Less than 5 m/16 feet).
- Push the SecureEasySetup™ button on your wireless router or access point. See the user's guide for your wireless router or access point for instructions.
- Press the Menu/Set or Menu key on the control panel.
- Press up or down navigation/arrow key until LAN appears and press Menu/Set or OK.
- Press up or down navigation/arrow key until Setup WLAN appears and press Menu/Set or OK.
- Press up or down navigation/arrow key until SecureEasySetup appears and press Menu/Set or OK.
The wireless network connection status using the SecureEasySetup™ software will be displayed; CONNECTING WLAN, CONNECTED or CONNECTION ERROR.
- CONNECTING WLAN is displayed when the print server is trying to make connections to your router or access point. Wait till either CONNECTED or CONNECTION ERROR is displayed.
- CONNECTED is displayed when the print server is successfully connected to your router or access point. You can now use your machine in a wireless network.
- CONNECTION ERROR is displayed when the print server has not successfully connected to your router or access point. Try starting from Step 1 again. If the same message is displayed again, reset the server back to the default factory settings and try again.