Please follow the steps below:
- Place your Brother printer close to the access point (Less than 5 m/16 feet).
- Push the SecureEasySetup™ button on your wireless router or access point. See the user's guide for your wireless router or access point for instructions.
- Press any of the Menu buttons (+, -, Set or Back) of the control panel on your printer to take the printer off-line.
- Press the + button or the - button to move forward or backward through the menus until NETWORK is displayed.
- Press Set. Press the + button or the - button to select WLAN.
- Press Set. Press the + button or the - button to select WIRELESS.
- Press Set. Press the + button or the - button to select SecureEasySetup.
- Press Set.
-
The wireless network connection status using the SecureEasySetup™ software will be displayed; CONNECTING WLAN, CONNECTED or CONNECTION ERROR.
- CONNECTING WLAN is displayed when the print server is trying to make connections to your router or access point. Wait till either CONNECTED or CONNECTION ERROR is displayed.
- CONNECTED is displayed when the print server is successfully connected to your router or access point. You can now use your printer in a wireless network.
- CONNECTION ERROR is displayed when the print server has not successfully connected to your router or access point. Try starting from Step 1 again. If the same message is displayed again, reset the print server back to the default factory settings and try again.