Date:02/04/2011 ID:faq000701_008




Title:
White spots or black spots at 94 mm (3.7 in.) intervals

Description:

Black spots
  • Make ten copies of a blank, white sheet of paper.
    If the problem is not solved, the drum unit may have glue from a label stuck on the OPC drum surface. Clean the drum unit. Please refer to the instructions, "Clean the drum unit".

  • The drum unit may be damaged. Put in a new drum unit. Please refer to the instructions, "REPLACE DRUM"

If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

DCP-7060D, DCP-7065DN, FAX-2840, FAX-2940, HL-2280DW, MFC-7240, MFC-7360N, MFC-7460DN, MFC-7860DW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear