Date:04/25/2007 ID:faq000032_004




Title:
I'm using Windows® 2000. Removable Disk does not work properly.

Description:

Please confirm the following:

  • Have you installed the Windows® 2000 update? If not, do the following:

    1. Unplug the USB cable.

    2. Install the Windows® 2000 update using one of the following methods.

      Install MFL-Pro Suite from the CD-ROM supplied with your machine.

      or

      Download the latest service pack from the "Windows Update" section of the Microsoft® Web site.

    3. Wait about 1 minute after you restart the PC, and then connect the USB cable.
  • Take out the memory card and put it back in again.

  • If you have tried "Eject" from within Windows®,  take out the memory card before you continue.

  • If an error message appears when you try to eject the memory card, it means the card is being accessed. Wait a while and then try again.

  • If all of the above do not work, turn off your PC and machine, and then turn them on again. (You will have to unplug the power cord of the DCP/MFC to turn it off.)
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

DCP-165C, DCP-350C, DCP-385C, DCP-585CW, MFC-250C, MFC-290C, MFC-465CN, MFC-490CW, MFC-5490CN, MFC-5890CN, MFC-5895CW, MFC-6490CW, MFC-685CW, MFC-6890CDW, MFC-790CW, MFC-885CW, MFC-990CW, MFC-J6510DW, MFC-J6710DW, MFC-J6910DW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear