Date:01/30/2012 ID:faq002872_000




Title:
Why does my Brother machine sometimes print the Transmission Verification Report even though I've turned the report off?

Description:

Even if you turn the Transmission Verification Report off by choosing Off, Off+Image, Off2 or Off2+Image, the report will print under the following circumstances:


  • If a fax you attempt to send is unsuccessful due to a transmission error.
    BUSY/NO

  • If you successfully send a fax, but the receiving machine modifies the size of the document you sent.

  • If you press Color (Colour) Start when sending a fax (black and white or color), but the receiving machine prints it in black and white.
    COLOR

Note

- If you choose Off2 or Off2+Image, prints a report only if your fax is unsuccessful due to a transmission error.

- Even if the Transmission Verification Report is set to Off+Image, the image will not appear on the Transmission Verification Report if you send a color fax.

- Click here for information about setting up the Transmission Verification Report.

If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

MFC-J265W, MFC-J280W, MFC-J415W, MFC-J425W, MFC-J430W, MFC-J435W, MFC-J5910DW, MFC-J615W, MFC-J625DW, MFC-J6510DW, MFC-J6710DW, MFC-J6910DW, MFC-J825DW, MFC-J835DW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear