Date:03/02/2006 ID:faqp000484_000




Title:

What should I know when I want to use the product with a Cable/DSL router?

Description:
  1. [When using the product with a fixed IP address]
    Know the range that your DHCP server assigns. Ensure to assign an IP address for the product out of the DHCP assignable range, but the address must be in the same segment on the network.
    -/Disable DHCP/BOOTP/RARP protocol.
  2. For example: In the case that the DHCP server assigns a range between 192.168.0.2 - 192.168.0.32, use a single IP address between 192.168.0.33 - 192.168.0.253 for the product.
    * Do not assign a duplicate IP address for another device.
    * Know that the DHCP server may have 192.168.0.1 or 192.168.0.254.
  3. [When using the product with an IP address assigned by DHCP server automatically]
    Register the IP address of the product in the DHCP server.
    For detailed configuration, refer to your DHCP server manual.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

PS-9000, PT-9200DX, PT-9500PC, QL-1050/1050N, QL-500/500A/500BW, QL-550, QL-560, QL-650TD, RJ-4040

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear