Date:27/09/2007 ID:faqh000006_000




Title:

Using the Spool Pin.

Description:
<Horizontal spool pin>
  1. Firmly hold the thread with a spool cap so that the thread does not turn too much.
    spool cap 1 Spool cap

    2. Note

      Make sure you use the correct size spool cap for the thread. If the spool cap is smaller the thread, tension may be incorrect.
  2. If you dont have a spool cap larger than the size of the thread, there is a slit in the thread spool.
    Slit(Notch) 1 Slit(Notch)

    3. Hint

      Install the spoll so that the slit faces the base of the spool pin.
  3. It is important that the thread is pulled out from the spool smoothly. Make sure there is space around the spool cap and the tip of the spool pin for thread to pass through.
    Make sure there is space
<Vertical spool pin>
If a spool of thread turns too much and thread tension becomes improper, place a felt under the spool of thread.
place felt under the spool of thread 1 Felt

2 Spool pin
If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

BC-2100/2300, BC-2500, BM-3500/2600, BM-3600/2700, CS-8060, CS-8120, DS-120, DS-140, ES-2000, FS-20, FS-40, Innov-is 1200, Innov-is 1500D/1500, Innov-is 200, Innov-is 400, Innov-is 4000D/4000, Innov-is 500D, Innov-is 600, Innov-is 700E, Innov-is 700EII, Innov-is 10/10A, Innov-is 100, Innov-is 1250, Innov-is 15, Innov-is 150SE/ 150, Innov-is 20/20LE, Innov-is 2200, Innov-is 30, Innov-is 35, Innov-is 350SE, Innov-is 50, Innov-is 5000, Innov-is 55, Innov-is 550SE/ 550, Innov-is 750E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is I, Innov-is Ie, JS23, LS-2125, NX-200, NX-2000, NX-400Q/400, NX-600, PE-180D, PE-190D, PE-300S, PE-400D, PQ-1500/1500S, PS-53/55/57, PX-100/200/300, PX-330, QC-1000, STAR110/130E, STAR230E/240E, SuperGalaxie, XL-2120/2220/2230, XL-2600/2610/2620, XL-3500/ 3510/3520, XL-3600, XL-5010/5020/5030, XL-5011/5012/5021/5031/5032, XL-5050/5060/5070, XL-5500, XL-5600, XL-5700, XL-6040, XL-6600, XR-65T, XR-6600

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear