Date:17/11/2005 ID:faq000667_000




Title:

The "Brother MFL-Pro Control Center" or "ControlCenter2.0" does not pop up when a document is placed in the ADF unit.

Description:

First, please verify the Brother Resource Manager software is working. If the software is currently running a street light icon will be on the bottom of your desktop (see image below). If the icon does not appear scan from another application (i.e. PaperPort) or restart your computer to activate the Brother Resource Manager. Once the software is activated the Brother MFL-Pro Control Center or ControlCenter2.0 will pop up automatically.

If the issue still remains please determine if you changed or updated the driver originally on your computer with a download from the Web Site. It is possible the incorrect update was installed on your computer, If you did change or update the driver originally on your computer you will need to uninstall the current driver and reinstall the previous working driver by following the instructions below:

 

Driver Uninstallation Steps:

Note

    If you are a Windows® 95/98/2000 user, this procedure deletes both the USB driver and Parallel driver even though you selected only one.

  1. Please click here to download the Uninstall Tool to remove the drivers.

  2. The Brother End-User License Agreement will appear. If you agree to the terms, click I ACCEPT.

  3. Save the file to your desktop

  4. When the file has downloaded double click the DelInf_x.EXE on your desktop and extract it.

  5. a new icon will be created on your desktop named Delinf32.exe. This is the Uninstall Tool 

  6. Double click the DelInf32 icon and the "Brother MFC Uninstaller" will appear.

  7. Set your model and connection type (USB or Parallel) and then click OK

  8. Restart your computer.  The Brother Drivers have now been removed.

  9. Unplug the power cord of the Brother machine AND the USB or parallel cable before re-installing the software

Driver Reinstallation Steps:

  1. Please verify the version of PaperPort that is installed on your computer. It will be ver.8.0 or ver.9.0.
    (You can check which version of PaperPort you are using; click:Start->Program->PaperPort->Help->About PaperPort...)
  2. Create a folder on your Desktop and title it BROTHER. This is where you will save the downloaded driver.
  3. Click "Download" to download the appropriate driver.

    For PaperPort 8.0 Users:
    OS  Driver
     Windows® 98/Me  Download
     Windows® 2000  Download


    For PaperPort 9.0 Users:
    OS  Driver
     Windows® 98/Me  Download
     Windows® 2000  Download

  4. The Brother End-User License Agreement will appear. If you agree to the terms, click I ACCEPT.

  5. Save the file to the "Brother" folder you created on your desktop.
  6. When the file has downloaded open the "Brother" folder and double click the downloaded file to extract it.
  7. Connect the FAX/MFC/DCP to your computer with a Parallel or USB cable and turn on the FAX/MFC/DCP by plugging in the power cord.
  8. When the "Found New Hardware Wizard" screen appears,click "Next".
  9. Select(Recommended) and click "Next".
  10. Check only "Specify a location" and click "Next".
  11. Click "Browse" to locate the the Brother file on your Desktop. Specify the same directory that you extracted the file to and click "Open", then "OK".
  12. Make sure "Specify a location" is selected and click "Next".
  13. Click "Finish".
  14. You may need to repeat STEPS 11 to 13 depending on your OS and Interface.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

DCP-8040, DCP-8045D

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear