Date:26/11/2010 ID:faq000105_018




Title:
How do I reset the network settings to the factory default?

Description:

You can reset the print server back to its default factory settings (resetting all information such as the password and IP address information) using the control panel as follows.
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.


Note

This function resets all wired and wireless network settings to the factory default.

  1. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
  2. Press Menu.
  3. Press the Up or Down Arrow key to choose Network. Press OK.
  4. Press the Up or Down Arrow key to choose Network Reset. Press OK.
  5. Press 1 to choose Reset.
  6. Press 1 to choose Yes for reboot.
  7. The machine will re-start, re-connect cables once this is complete.

<For touchscreen models>

  1. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
  2. Press MENU on the LCD screen.
  3. Press Network.
  4. Press the Up or Down Arrow key to display Network Reset and then press Network Reset.
  5. Press Yes.
  6. Press Yes for 2 seconds to confirm.
  7. The machine will re-start, re-connect cables once this is complete.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

DCP-7055W, DCP-7065DN, DCP-7070DW, DCP-8110DN, DCP-8250DN, DCP-9010CN, DCP-9055CDN, DCP-9270CDN, MFC-7360N, MFC-7460DN, MFC-7860DW, MFC-8510DN, MFC-8520DN, MFC-8950DW, MFC-8950DWT, MFC-9120CN, MFC-9320CW, MFC-9460CDN, MFC-9465CDN, MFC-9970CDW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear