Date:20/02/2006 ID:faq000105_007




Title:
How do I factory reset the Network Card?

Description:

Please follow the instructions below:
  1. Turn off the printer.
  2. Make sure the front cover is closed and the power cord is plugged in.
  3. Hold down the GO button as you turn on the power switch.  First all the LED's will light up and then the STATUS LED will turn off.  Release the GO button and the LED's will turn off.
  4. Press the GO button six times.  Make sure that all the LED's light up to indicate the Network Card has been reset to its factory default settings

Note

    Resetting the Network Card back to its default settings will reset all information including password and IP address
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

HL-5250DN, HL-5350DN, HL-5370DW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear