DCP-7070DW

The message REPLACE TONER indicates the toner cartridge needs to be replaced with a new one. Please follow the steps below to replace the toner cartridge.

NOTE: Videos and illustrations shown below are from a representative product and may differ from your Brother machine.

HINT:
The Brother machine has separate consumables: the toner cartridge and the drum unit. Verify you replace only the toner cartridge, and not the drum unit. Click here to see the difference between the toner cartridge and the drum unit. Also you can confirm the model number of the toner cartridge on the Consumables & Options page. Click here to go to the Consumables & Options page.

1. Make sure that the machine is turned on. Open the front cover and leave the machine turned on for 10 minutes to cool down.
   
   
   * This movie is being streamed from YouTube. (Opening new window.)
   
   

   Caution

   • You must ensure the machine is turned on when you replace the toner cartridge so that the machine recognizes the toner has changed.
   • After you have just used the machine, some internal parts of the machine will be extremely hot. Wait for the machine to cool down before you touch the internal parts of the machine.
   
   
2. Hold your Brother machine with one hand, take out the drum unit and toner cartridge assembly by pulling on the handle in the middle of the drum unit and toner cartridge assembly. We recommend that you place the drum unit and/or the toner cartridge on a clean, flat, level, stable surface with a sheet of disposable paper or cloth underneath it incase you accidentally spill or scatter toner.
   
   
   * This movie is being streamed from YouTube. (Opening new window.)
   
   

   Caution

   DO NOT use cleaning materials that contain ammonia, alcohol, any type of spray, or any type of flammable substance to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock.
   

   
   
   
3. Push down the green lock lever and take the toner cartridge out of the drum unit.
   
   
   * This movie is being streamed from YouTube. (Opening new window.)
   
   

   Caution

   • DO NOT put a toner cartridge into a fire. It could explode, resulting in injuries.
   • Be careful not to inhale toner.
   • Handle the toner cartridge carefully. If toner scatters on your hands or clothes, immediately wipe or wash it off with cold water.
   • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustration.
     

     

   
   

   Note

   • Be sure to seal up the toner cartridge tightly in a suitable bag so that toner powder does not spill out of the cartridge.
   • Go to http://www.brother.com/original/index.html for instructions on how to return your used consumable items to the Brother collection program. If you choose not to return your used consumable, please discard the used consumable according to local regulations, keeping it separate from domestic waste. If you have questions, call your local waste disposal office. 
   
   
4. Unpack the new toner cartridge. Hold the cartridge level with both hands and gently shake it from side to side several times to spread the toner evenly inside the cartridge. Pull off the protective cover.
   
   
   * This movie is being streamed from YouTube. (Opening new window.)
   
   

   Caution

   • Wait to unpack the new toner cartridge until immediately before you put it in the machine. If a toner cartridge is left unpacked for a long time, the toner life will be shortened.
   • Put the toner cartridge in the drum unit immediately after you have removed the protective cover.
   • To prevent any degradation to the print quality, DO NOT touch the shaded parts shown in the illustrations.
     

     

   • Brother strongly recommends that you DO NOT refill the toner cartridge provided with your machine. We also strongly recommend that you continue to use only Genuine Brother Brand replacement toner cartridges. Use or attempted use of potentially incompatible toner and/or cartridges in the Brother machine may cause damage to the machine and/or may result in unsatisfactory print quality. Our warranty coverage does not apply to any problem that is caused by the use of unauthorized third-party toner and/or cartridges. To protect your investment and obtain premium performance from the Brother machine, we strongly recommend the use of Genuine Brother Supplies.
   
   
5. Put the new toner cartridge firmly into the drum unit until you hear it lock into place. Make sure that you put in the toner cartridge properly or it may separate from the drum unit. If you put it in properly, the green lock lever will lift automatically.
   
   
   * This movie is being streamed from YouTube. (Opening new window.)
   
   
6. Clean the primary corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times. Be sure to return the green tab to the home position. If you do not, printed pages may have a vertical stripe.
   
   
   * This movie is being streamed from YouTube. (Opening new window.)
   
   
7. Put the drum unit and toner cartridge assembly back into the machine. Close the front cover.
   
   
   * This movie is being streamed from YouTube. (Opening new window.)
   
   

   Note

   After replacing the toner cartridge, DO NOT turn off the machine's power switch or open the front cover until the LCD clears the Please Wait message and returns to Ready mode.
   

If the error message still continues to appear, refer to "I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner End" or the Toner LED is still on or flashing."