Date:12/11/2012 ID:faqp001264_001




Title:
How do I initialize and clear the P-touch to factory default settings?

Description:

You can reset the P-touch labeler when you want to initialize the settings,
or in the event that the P-touch is not working properly.

  1. Press on_off to turn off the power.

  2. While holding down shift and  r4 key, press on_off to turn on the power.

  3. Release on_off, and then release shift and r4 key

  4. The machine has been initialized.

 


Note

The internal memory is reset, and all text and stored files are cleared.

Also, the language, unit, and all settings will be cleared.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

PT-90

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear