Date:22/04/2011 ID:faqp000210_000




Title:

Even though the tape length is set to less than 25 mm in P-touch Editor, the label is printed with a length of 25 mm.

Description:
  • If the "Auto Cut" check box is cleared, a tape length setting of less than 25 mm is applied only when multiple copies are printed.
  • if the "Auto Cut" check box is selected, the label will be printed with a length of 25 mm, even if the length is set to less than 25 mm.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

PT-18R, PT-1950, PT-2100, PT-2450DX, PT-2700, PT-2730, PT-3600, PT-9200DX, PT-9200PC, PT-9600

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear