Date:04/03/2009 ID:faqh000459_000




Title:
When should I use the extra spool pin?

Description:
When using spools with a size that cannot be loaded into the thread cassette, use the extra spool pin.


Caution

When threading the upper thread, carefully follow the instructions.
If the upper threading is not correct, the thread may become tangled or the needle may bend or break.

  1. Place the spool of thread onto the extra spool pin.
    Place the spool of thread onto the extra spool pin. 1 Extra spool pin

    2 Spool
  2. Slide the spool cap for the size of the spool onto the spool pin.
    Slide the spool cap for the size of the spool onto the spool pin. 1 Spool cap
  3. Insert the tabs on the extra spool pin into the holes on the top of the thread cassette.
    Insert the tabs on the extra spool pin.
  4. Thread the thread cassette with the thread from the spool on the extra spool pin.
    Thread the thread cassette.
  5. Check that the thread cassette indicator is lit up in green, and insert the thread cassette (with the extra spool pin attached) into the thread cassette compartment.
    Use both hands to press down on both sides of the extra spool pin.
    Check that the thread cassette indicator is lit up in green.
    Check that the thread cassette indicator is lit up in green. 1 Thread cassette indicator

    Note

    • At the same time that the thread cassette is inserted, the needle is threaded.
    • The extra spool pin is now installed.
If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

CS-80, CS-8060, CS-8120, Innov-is 500D

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear