Date:23/04/2009 ID:faqh000391_002




Title:
The "Pivot" key can not be selected.

Description:
  • If "NEEDLE POSITION-UP/DOWN" in the machine settings screen is set to the raised position, the pivot function cannot be used. In that case, the key appears as a dotted line and is not available.
    In the following procedures, please change setting.
    1. Press .
    2. On the machine settings screen, select for the "NEEDLE POSITION-UP/DOWN".

  • When the setting is selected, the pivot function can only be used with stitches where presser foot J, N, C or O is indicated in the upper-left corner of the screen.
    If any other stitch is selected, the key appears as a dotted line and is not available.
    Please change the stitch.


If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

Innov-is I, Innov-is Ie

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear