Date:22/04/2013 ID:faqh000064_000




Title:
An "E4" message appears on the panel.

Description:

The reverse/reinforcement stitch button or needle position button was pressed while the bobbin winder shaft is moved to the right.


Move the bobbin winder shaft to the left before continuing the operation.

 

 

Note

Each time a key pressed or an incorrect operation is performed, a beep is sounded.

  • For a correct operation
    One beep is sounded.
  • If an incorrect operation is performed
    Two or four beeps are sounded.
  • If the machine locks up, for example, because the thread is tangled
    The sewing machine continues to beep for four seconds.
    The machine automatically stops.
    Be sure to check for the cause of the error, and correct it before continuing to sew.
If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

BC-2100/2300, BC-2500, comfort 40E, comfort 60E, CS-6000/6000t, CS-80, CS-8060, DS-120, DS-140, ES-2000, ES-2020, ES-2220, ES-2420, FS-20, FS-40, Innov-is 200, Innov-is 150SE/ 150, Innov-is 20/20LE, innov-is 25, Innov-is 250, Innov-is 30, Innov-is 300, Innov-is 35, JS-40E, JS-50CE, JS-50E, JS-60E, JS-70E, ML-750, ModerN 40e, ModerN 50e, ModerN 60e, MS-4, MS-5, MS-6, NX-200, RS-240/250/260, SM-340E, SM-360E, Style-40e, Style-50e, Style-60e

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear