Date:16/12/2010 ID:faq002738_000




Title:
The installer does not start after extracting the Full Driver & Software Packages downloaded from the "Download" section. (For Windows Vista® or earlier)

Description:
Please follow the steps below to start the installer.
  1. Open the mflpro folder in the temporary folder.
  2. You will find multiple folders: xxxxx (or Setupxxxxx) and Data (where xxxxx = your model name).
  3. Open the xxxxx (or Setupxxxxx) folder.
  4. Double click Setup.exe located in the yyy folder (where yyy = language name).
  5. The installer will start. Follow the installation screen directions.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

DCP-7010, DCP-7010L, DCP-7010R, DCP-7025, DCP-7025R, DCP-7030, DCP-7030R, DCP-7040, DCP-7040R, DCP-7045N, DCP-7045NR, DCP-8060, DCP-8065DN, DCP-8070D, DCP-8085DN, DCP-9040CN, DCP-9042CDN, DCP-9045CDN, FAX-2920, FAX-2920R, MFC-7225N, MFC-7320, MFC-7320R, MFC-7420, MFC-7420R, MFC-7440N, MFC-7440NR, MFC-7820N, MFC-7820NR, MFC-7840W, MFC-7840WR, MFC-8370DN, MFC-8380DN, MFC-8460N, MFC-8860DN, MFC-8870DW, MFC-8880DN, MFC-8890DW, MFC-9440CN, MFC-9450CDN, MFC-9840CDW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear