Date:02/11/2006 ID:faq000777_010




Title:

How do I enlarge or reduce the copies I make?

Description:

Please note that changing the enlargement or reduction ratio only affects the next copy job performed.

To enlarge or reduce the next copy you make, please follow these steps:
  1. Press the Copy mode key to illuminate it.
  2. Load your document.
  3. Use the dial pad to enter the number of copies you want (up to 99).
  4. Press CopyOptions and use the Up or Down Arrow key  to choose Enlarge/Reduce. Press OK.
  5. Use the Up or Down Arrow key to choose the enlargement or reduction ratio you want, then press OK.

    -OR-

    Use the Up or Down Arrow key to choose Custom (25 - 400%) and press OK. Use the dial pad to manually enter an enlargement or reduction ratio between 25% and 400%, then press OK. For example: press 5, 3 to enter 53%.

  6. Press Start.

Note

    Page Layout Options 2in1(P), 2in1(L), 4in1(P) or 4in1(L) are not available with Enlarge/Reduce.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

FAX-1355, FAX-1360, FAX-1460, FAX-1560

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear