Home > Europe > Others >
DCP-9270CDN > FAQ's & Troubleshooting > Maintenance > faq000315_013
Replace WT Box
Replace the waste toner box following the steps below:NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations.
To avoid print quality problems, DO NOT touch the shaded parts shown in the illustration.
This step is only necessary when you are replacing the waste toner box for the first time, and are not required for the replacement waste toner box. The orange packing pieces are installed at the factory to protect your machine during shipment.
Handle the waste toner box carefully in case you accidentally spill or scatter toner. If toner scatters on your hands or clothes, wipe or wash it off with cold water at once.
Discard the used waste toner box according to local regulations, keeping it separate from domestic waste. If you have questions, call your local waste disposal office.
DCP-9055CDN, DCP-9270CDN, MFC-9460CDN, MFC-9465CDN, MFC-9970CDW
Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.
Site Map |
Global Brother |
Copyright © Brother Industries, Ltd. All Rights Reserved.