Date:29/01/2009 ID:faq000307_011




Title:
How do I clear the message "Jam Tray 1" or  "Jam Tray 2" from the LCD display?

Description:

To clear paper jams, please follow the steps below.
NOTE: Illustrations shown below are from the representative product and may differ from your Brother machine.


  1. Pull the paper tray completely out of the machine.

Note

The LCD names for the paper trays are as follows.

  • Standard paper tray: Tray 1
  • Optional lower tray: Tray 2 (If applicable)

  1. Use both hands to slowly pull out the jammed paper.
  1. Make sure the paper is below the maximum paper mark of the paper tray. While pressing the blue paperguide release lever, slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.

  2. Put the paper tray firmly back in the machine.

Caution

DO NOT take out the standard paper tray while paper is feeding from a lower paper tray as this will cause a paper jam.


If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

DCP-8070D, DCP-8085DN, MFC-8370DN, MFC-8380DN, MFC-8880DN, MFC-8890DW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear