Date:26/04/2013 ID:faq000011_016




Title:
White spots appear in areas of dense black printing.

Description:

Please check the following points:

  • Make sure that you use paper that meets our specifications. To see what kind of paper you can use, click here.
  • Make sure the printer's environment is appropriate because conditions such as high humidity can cause hollow print.
  • Choose "Thick paper" mode in the printer driver, or use thinner paper than you are currently using. Check if the setting next to "Media Type" is as it should be.

 

If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

HL-1030, HL-1240, HL-1250, HL-1270N

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear