Date:27/06/2012 ID:faqp001526_000




Title:

How do I transfer label templates to the printer via network?

Description:

To transfer the templates to the printer via network, you need BRAdmin Professional.
Please download and install it. You can go to the Download page by clicking the "Downloads" tab in the top left corner of this page.

The printer names and pictures in the following screens may differ from your purchased printer. The screens may vary depending on the model.

  1. Create the template you want to transfer with P-touch Editor 5.0, then choose [File]-[Transfer Template...] menu to register. Transfer Manager will start up.

  2. In Transfer Manager, click button, or choose [File]-[Save Transfer File] menu to save the registered template in .blf format.

  3. Start BRAdmin Professional.
    Choose the printer from the list and click on the [Control] menu. Select [Load Firmware].
    bradminpro

  4. Choose Load Firmware function of the BRAdmin Professional. Choose [TFTP PUT] and click [OK] button.
    bradminpro

  5. Choose the file in .blf format which you saved in step 2 and load it to the printer.
    Choose .blf file and click [OK].
    The default password is "access".
     bradminpro

If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

PT-9800PCN, QL-1060N, QL-580N, RJ-4040, TD-4100N

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear