Date:03/05/2009 ID:faqh000507_000




Title:
Preparation before threading

Description:
 Raise the telescoping thread tree to its highest position.

Make sure that the thread holders are in alignment above the spool pins as illustrated below.

 

 


  1. Turn off the main power and light switch for safety.

     

     

     

  2. Raise the presser foot using presser foot lever.

     

     

     

  3. Turn the hand wheel so that the mark on the hand wheel <A> is aligned to the line <B> on the machine. (See CHAPTER 1 "Turning direction of hand wheel".)

     
If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

3034D

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear