Date:03/29/2010 ID:faq002493_000




Title:
My Printer starts warming up in Sleep mode. What can I do?

Description:

When the status monitor is on, the printer might start warming up even though it is in the Sleep mode.


To solve this problem, please follow the instructions below.

  1. Check your Status Monitor version.

    1. Open the Status Monitor menu.

      If the Status Monitor is displayed on the desktop, right click on the Status Monitor Window.
      If the Status Monitor is displayed on the taskbar, right click on the Status Monitor icon.

Hint

If the Status Monitor is not displayed either on desktop or taskbar, click "Start" => "All Programs" => your printer name => "Status Monitor". 
The status Monitor will be displayed on the desktop.

    1. Click "Help" => "About" from the menu.
    1. Check your Status Monitor version.

      If the version is "3.5.1.1" or later, please contact "Brother Customer Service".
      If the version is "3.5.1.0" or earlier, please go to the step 2.
    1. Uninstall version 1.00 of the Brother Full Driver & Software Package.

      1. Click the "Start"=> "All Programs" => your printer name.
      2. Click "UnInstall".
      3. Follow the instructions on the screen.
    1. Click here to reinstall version 1.01 or later of the Brother Full Driver & Software Package following the installation instruction on the download page.
    1. Check that your Status Monitor version is updated to "3.5.1.2" or later as you did in the step 1.

     

     

    Note

    This problem is solved only if version of 1.0.1 or later of the Brother Full Driver & Software Package is installed.
    If your question was not answered, please check...
      

    • Have you checked other FAQ's?

    • Is the answer in the user guide?

    • If you need further assistance, please contact Brother customer service:

    Related Models

    HL-2140, HL-2150N, HL-2170W

    Was the information on this page helpful?

    Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

    Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

    >Clear