To create labels with a 3.5 mm width tape, you need to set the top and bottom margins of the tape. Otherwise the printed text may extend beyond the width of the tape because a 3.5 mm tape cassette is detected as a 6 mm tape cassette.
Follow the procedures below to set the tape margins in order to print the text correctly.
-
Insert a 3.5mm width tape into your P-touch.
-
Start up P-touch Editor.
-
Make sure that the tape width is set to 6mm.
If not, select 6mm from the pull-down menu.
-
Click on the "File" on the menu bar and then select the "Printer/Page Setup…" to display the Printer Setup dialog box.
-
In the Printer Setup dialog box, select the "Page Setup" tab.
Under the Margins, set the top and bottom margins to 1.8mm (Recommended value).
-
Click the OK button to apply the setting.
Click 
and then type in the text.