Date:19/11/2007 ID:faq002249_000




Title:
The Drum LED is still lit even after replacing the old drum unit with a new one. What can I do?

Description:

 

 

If the Drum LED is still lit after replacing the drum unit, the Drum counter may not be reset. 
Reset the Drum counter as follows:

 

Caution

    Do not reset  the Drum counter when you do not replace the Drum unit.

  1. Open the front cover.
  2. Locate the control panel button under the LED lights on the left side.
  3. Press the control panel button until all lights are lit, then release it.
    The Drum counter is now reset.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

HL-1230, HL-1240, HL-1250, HL-1270N, HL-1440, HL-1450, HL-1470N

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear