Home > Asia/ Oceania > New Zealand >
HL-8050N > FAQ's & Troubleshooting > Paper Feed Problem > faq000161_000
Follow the procedure below to remove the jammed paper.
Remove any paper from the center output tray.
Open the top cover.
Do not touch any parts inside the printer.
Hold the toner cartridge by the grip and pull it out slowly. Then place it on a flat surface.
To prevent the toner from dirtying the surface, lay a piece of paper on the surface before putting the toner cartridge down.
Close the top cover securely.
Open the back cover by lifting the lower gray lever at the top left corner of the back of the printer.
Remove any jammed paper. If paper is torn, check for any remaining torn pieces of paper.
Close the back cover.
Make sure that the levers at the back of the printer, as shown in the illustration, are returned to the positions they were in before clearing the jam.
Hold the toner cartridge by the grip and insert it into the slot inside the printer.
Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.
Site Map |
Local Web Site |
Global Brother |
Copyright © Brother Industries, Ltd. All Rights Reserved.