Date:06.07.2010 ID:faq002541_003




Title:
Clean the paper pick-up roller

Description:

Caution

DO NOT use cleaning materials that contain ammonia, alcohol, any type of spray, or any type of flammable substance to clean the outside or inside of the machine. Doing this may cause a fire or electrical shock.

image





Follow the steps below to clean the paper pick-up roller.

  1. Turn off the machine's power switch. Disconnect all interface cables, and then unplug the AC power cord.

  2. Pull the paper tray completely out of the machine.

  3. Tightly wring out a lint-free cloth soaked in lukewarm water, and then wipe the separator pad(1) of the paper tray with it to remove dust.

    image


  4. Wipe the two pick-up rollers(1) inside of the machine to remove dust.


    image


  5. Put the paper tray back in the machine.

  6. Connect interface cables and then plug the machine back in. Turn on the power switch.



 
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

HL-4150CDN, HL-4570CDW

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear