Date:01/07/2011 ID:faqp000413_001




Title:

A data transmission error appears on the computer when trying to print a label.

Description:
  1. Check that the correct port is chosen.

    • Using P-touch Editor, select [File] - [Printer/Page Setup]. Verify that the selected printer is the QL-570. If not, select it from the pull-down menu.

    • Using P-touch Add-Ins, select the Page Settings icon. Choose the [Printer Setup] Tab and verify that the selected printer is the QL-570. If not, select it from the pull-down menu.

  2. Check if the QL-570 is in cooling mode. If the LED lamp is flashing in orange, the QL-570 is in cooling mode. Wait until the LED lamp stops flashing, and then try printing again.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

QL-570

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear