Date:15/02/2008 ID:faqp000275_000




Title:
How can I minimize the tape margin?

Description:
Please follow the steps below:

  1. Press .  " " appears on the LCD display.

  2. Continue pressing  or   until "MARGIN" is displayed.

  3. Press .

  4. Press  until "NARROW" is displayed.

  5. Press  to apply the setting.

  6. Press  .

  7. Cut along the dots " : " with scissors so that the text is centered in the label.

Note

    The 25mm piece of tape that is produced prior to every label cannot be eliminated due to the construction of the tape mechanism. However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.

    The following methods are useful for reducing tape use:
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

PT-1000, PT-900

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear