Date:07/04/2009 ID:faqh000000_000




Title:
Incorrect thread tension

Description:
  • Even though the thread tension dial is set to the Standard/Basic setting, it may need to be adjusted depending on the combination of fabric, thread and needles being used.
  • Make sure you use a bobbin that is best suited for your machine.

Note

The first 2-4 stitches of a seam may become weak.Sew reverse/reinforcement stitches at the beginning of your sewing.
If your question was not answered, please check...
  

  • Have you checked other FAQs?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

BC-2100/BC-2100PRW, BC-2500, BM-3500/2600, BM-3600, CS-6000/ b/ t, CS-8060, DS-120, DS-140, GS2500, GS2510, GS2520, GS2700, GS3700, GS3710, Innov-is 500D, Innov-is 900, Innov-is 950, JS1400, JS1410, JS1700, LS-2125/2160, LS-2150, PE-190D, PS-53/55/57, XL-2120/2220/2230/2240, XL-2600/2620/2630, XL-5500, XL-5700, XL-6040/6050, XT37

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear