Date:31/10/2006 ID:faq002384_000




Title:
Installing the Print Server.

Description:
  1. Turn off the printer power switch.


  1. Connect the NC-2100p to the parallel port located on the back of the printer.


  1. Connect the Power cord from AC adapter to the NC-2100p.


  1. Connect the network interface cable to NC-2100p, and then connect it to a free port on your hub.


    1. Plug the AC Adapter into an AC outlet, and then turn the printer power switch on.
    If your question was not answered, please check...
      

    • Have you checked other FAQ's?

    • Is the answer in the user guide?

    • If you need further assistance, please contact Brother customer service:

    Related Models

    NC-2100p

    Was the information on this page helpful?

    Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

    Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

    >Clear