Date:27/10/2006 ID:faq002382_000




Title:
I can't print over my network.

Description:

Please check the points below.

  1. Make sure that the LAN settings are correctly configured (for example, if you are using the TCP/IP protocol, make sure that the IP address and subnet mask settings are correctly configured).
  2. Check that the protocol you are trying to use is not disabled (print a configuration sheet to check this).
  3. Check and try everything in the troubleshooting section of the user's guide.
  4. Try switching your machine off and then ON again.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

NC-2010p, NC-2100p

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear