Date:16/10/2006 ID:faq002162_000




Title:
What are the technical specifications for the type of paper I should use on my laser Printer/FAX/MFC?

Description:

Recommend paper should have the following technical specifications:

 

- Basis Wait 75 - 90 (gsm)
- Thickness 80 - 110 (micrometer)
- Roughness Higher than 20 (sec.)
- Stiffness 90 - 150 (cm3/100)
- Grain Direction Long Grain
- Volume Resistivity 10e9 - 10e11 (ohm)
- Surface Resistivity 10e10 - 10e12 (ohm-cm)
- Filler CaCO3 (Neutral)
- Ash Content below 23 (wt%)
- Brightness higher than 80 (%)
- Opacity higher than 85 (%)

 

As a general guideline, paper that it suitable for a photocopier is generally suitable.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

HL-1230, HL-1240, HL-1250, HL-1270N, HL-1440, HL-1450, HL-1470N, HL-1650, HL-1670N, HL-1850, HL-1870N, HL-2460

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear