Date:19/11/2012 ID:faq000261_011




Title:
How do I improve the copy or fax quality?

Description:

Please clean the print head and the scanner area inside the unit. Follow the steps listed below:

To clean the print head:

  1. Unplug the telephone line and then the power cord.
    When you reconnect these lines later, connect the power cord first, then the telephone line.
  2. Open the top cover by lifting the lever on the right side of the top cover.
  3. Take out the print cartridge.

  1. In the base of the FAX (where the ribbon as installed) you will see a copper color strip with white triangles. This is the print head.
    Clean the print head with a lint-free cloth that is dry or lightly moistened with isopropyl alcohol.
  1. Wait until the alcohol on the print head is completely dry.
  2. Install the print cartridge.
  3. Close the top cover. Press down on both sides of the top cover until it clicks.

To clean the scanner area:

  1. Unplug the telephone line and then the power cord.
    When you reconnect these lines later, connect the power cord first, then the telephone line.

  2. Open the top cover by lifting the lever on the right side of the top cover.

  3. Clean the white film and the glass strip with isopropyl alcohol on a lint-free cloth.

Note

Be careful not to bend the white film or drop anything into the fax machine.

  1. Close the top cover. Press down on both sides of the top cover until you hear it click into place.

If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

FAX-817/FAX-817S, FAX-827/FAX-827S, FAX-837MC/FAX-837MCS, FAX-878

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear