Date:16/10/2006 ID:faq000161_003




Title:
"JAM C" error appears on the LCD. What should I do?

Description:
JAM C
.

 

If a paper jam occurs at paper exit, follow these steps:

  1. Open the top cover of the printer.
  1. Slowly pull the jammed paper from the paper exit with both hands.
  1. Close the top cover of the printer.

 

 

If a paper jam occurs behind the face up output tray before the paper exits, remove the jammed paper as follows:

  1. Open the top cover of the printer.

Note

    If a duplex unit is installed on the printer, remove it from the printer. After removing the jammed paper, re-install the duplex unit onto the printer.

  1. Open the face up output tray.
  1. Slowly remove the jammed paper with both hands.
  1. Close the face up output tray.
  1. Close the top cover of the printer.
If your question was not answered, please check...
  

  • Have you checked other FAQ's?

  • Is the answer in the user guide?

  • If you need further assistance, please contact Brother customer service:

Related Models

HL-7050, HL-7050N

Was the information on this page helpful?

Please indicate (above) if the information was helpful or not. If you have additional comments please enter them into the area below and click Submit.

Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.

>Clear