Home > Asia/ Oceania > Others >
PQ-1500/1500S > FAQs & Troubleshooting > Preparation > faqh000483_000
Rotate hand wheel towards you until needle is in the highest position, and lower presser foot.
Take thread in your left hand, and gently pull it forward.
Lower automatic needle threader.
* Pull thread along the right side of the pin.
* Do not force the needle threader lower than the eye of the needle. Be sure that the needle is in the highest position.
Turn the needle threader lever all the way in the direction of 1 and when the hook extends from the needle hole, pull the thread in the direction of 2 to catch it on the hook.
While holding the thread gently, return the needle threader lever to the right.
As you do this the hook that has caught the thread will move as well, pulling a loop of thread through the eye of the needle.
Pull thread loop to the right.
The automatic needle threader cannot be used with the threadneedle combinations illustrated in the chart.
]Transparent nylon thread can be used regardless of the chart, providing the needle used is a #14 or #16.
Sorry, we cannot reply directly to your e-mail, but we will listen to your comments.
Site Map |
Global Brother |
Copyright © Brother Industries, Ltd. All Rights Reserved.